NIPPON PILLAR PACKING PE-5MA

Questions and Answers

R
richardsisabellaAug 10, 2025
What to do if my NIPPON PILLAR PACKING PE-5MA Water Pump does not operate?
- S
  Suzanne SmithAug 10, 2025
  If your NIPPON PILLAR PACKING Water Pump isn't operating, several factors could be at play. First, ensure air is being supplied by checking the piping and valves. Next, verify the solenoid valve's functionality and repair or replace if needed. Examine the controller and replace if it malfunctions. Confirm that the air supply pressure and flow rate are adequate; readjust if necessary. Inspect the wiring of the proximity sensor/solenoid valve for disconnections or incorrect wiring and repair. Check for high discharge pressure due to a blocked filter and repair the discharge pipe and filter. Ensure the valve on the discharge pipe is open. Finally, inspect the bellows for damage and replace if broken.
R
Ryan RyanAug 14, 2025
Why is air mixed into the liquid in my NIPPON PILLAR PACKING PE-5MA?
- L
  lisa12Aug 14, 2025
  If air is mixing into the liquid of your NIPPON PILLAR PACKING Water Pump, first, check the bellows for any breaks and replace if necessary. Next, inspect the through bolts to ensure they are tightened. If loose, retighten them. Also, the pump head might be too high; lower it to 2 m or less. Finally, verify that the suction pipe is the specified size; if it's too small, replace it.
R
Rhonda MannAug 20, 2025
Why is the pumping speed low on my NIPPON PILLAR PACKING Water Pump?
- R
  Rhonda KelleyAug 20, 2025
  If the pumping speed of your NIPPON PILLAR PACKING Water Pump is low, it could be due to several reasons. Start by readjusting the air supply pressure if the air supply pressure or air flow rate is low. You should also check the solenoid valve for malfunctions, repairing or replacing it as needed. Inspect the liquid filter for blockages, and repair the suction pipe, valve, and filter if necessary. Finally, replace the check valve if it malfunctions due to foreign objects.
T
Tyler WatkinsAug 26, 2025
What to do if my NIPPON PILLAR PACKING Water Pump operates, but liquid is hardly pumped?
- J
  Justin SimsAug 26, 2025
  If your NIPPON PILLAR PACKING Water Pump operates but pumps liquid with difficulty, the bellows might be broken, so check and replace if necessary. The check valve might also be malfunctioning due to wear, damage, or foreign objects, in which case you should replace it. High discharge pressure, possibly from a blocked filter, could also be the cause, so check the suction pipe, valve, and filter, and repair as needed.
D
Dana CooperAug 29, 2025
Why is liquid entering the air supply piping in my NIPPON PILLAR PACKING PE-5MA Water Pump?
- N
  nbensonAug 29, 2025
  If liquid is entering the air supply piping of your NIPPON PILLAR PACKING Water Pump, it could be due to a broken bellows, which should be checked and replaced. Alternatively, the supply air might be damp, in which case you should use dry (instrumentation) air.
B
Brittney ToddSep 4, 2025
How to fix abnormal vibrations in my NIPPON PILLAR PACKING PE-5MA?
- M
  Miguel WilliamsSep 4, 2025
  If your NIPPON PILLAR PACKING Water Pump suffers from abnormal vibrations, check and retighten the piping and its support if they are loose. Also, check and retighten the bolts in the pump base if they are loose.

NIPPON PILLAR PACKING PE-5MA Specifications

General

Brand	NIPPON PILLAR PACKING
Model	PE-5MA
Category	Water Pump
Language	English

NIPPON PILLAR PACKING PE-5MA - User Manual

Table of Contents

Questions and Answers

NIPPON PILLAR PACKING PE-5MA Specifications