Need help?Do you have a question about the Nira i7r and is the answer not in the manual?
Details the items included in the NIRA i7r package.
Provides definitions for technical terms used in the handbook.
Describes the capabilities and functions of the NIRA i7r system.
Explains the connection between Air-Fuel ratio, Lambda, and engine smoke.
Details the key measurement principles used by the NIRA i7r.
Instructions for connecting NIRA i7r injectors.
Details on connecting fuel pressure control valves (VCV and PCV).
Guidance on installing the CKP sensor and selecting the pulse wheel.
Instructions for installing the CAM sensor for engine synchronization.
Information on installing and verifying the APP sensor.
Setup for MAP and MAT sensors for air mass calculation.
Details on installing and using the ECT sensor.
Information on mounting and connecting the Lambda sensor.
Guidance on installing the EGTC sensor for exhaust gas temperature.
Instructions for connecting boost pressure actuators.
Wiring details for the main relay supplying power to actuators.
Instructions for correctly installing the fuel pump relay.
Guidelines for physically mounting the NIRA i7r unit.
Steps for installing the NIRA rk calibration software on a PC.
Introduction to NIRA rk features and basic operation.
How to use the NIRA rk software for calibration and configuration.
Explanation of parameter types and how to manage them in NIRA rk.
Overview of PID controller functionality and factors (P, I, D).
Methods for viewing input signals and sensor data in NIRA rk.
Features for logging and analyzing engine data.
Procedure for protecting calibration data files with a password.
Example setup for using FlexiPorts for boost controller input.
Details on how NIRA i7r handles fuel mass calculations.
Information on controlling injection angles and timing.
Explanation of NIRA i7r's fuel pressure control capabilities.
Configuration options for boost actuator output type (H-bridge/PWM).
Describes the three control modes for the boost actuator.
Details on the main boost control handler and its PID setup.
Essential offline parameter setup before attempting to start the engine.
Procedure for connecting the PC to NIRA i7r and going online.
Common issues and solutions for engine starting problems.
Guidance on making adjustments for improved engine performance.
Details on input signal levels and electrical characteristics.
Information on output types, electrical characteristics, and comments.
Specifications for CAN communication interfaces.
General| Brand | Nira |
|---|---|
| Model | i7r |
| Category | Controller |
| Language | English |
To Next Page
