Nirvana NE55 - Page 15

12
No.
Item
Operation Way
4
Set Temperature
In the start-on state, press " " to decrease the temperature setting, and
press " " to increase the temperature setting.
5
Set Clock
Press " " on the main interface to enter the current time hour setting. The
hour part flashes. Press " " and " " to adjust the hour, then press "
" enter the current time minute setting. The digital minutes will flash. Press
" " and " " to adjust. Press " " or " " to exit after finishing the
time setting.
6
Time On
Press " " on the main interface to enter “time on” hour setting. The hour
part will flash. Press " " and " " to adjust. Then press " " to enter
the minute setting. The minute part will flash. Press " " and " " to
adjust. Press " " or " " to exit after completing the Time on setting.
7
Time Off
Press " " on the main interface to enter the “time off” hour setting. The hour
part will flash. Press " " and " " to adjust. Then press " " to enter
the minute setting. The minute part will flash. Press " " and " " to
adjust. Press " " or " " to exit after completing the Time Off setting.
8
Exit Interface
In other menus, press " " to exit and return to the main menu.
9
Fahrenheit /
Celsius Switch
In the shutdown state, press " " and " " 5s to switch °F / °C.