3-32 Navigation
6. Touch a street as the 1st street from the list.
7. Touch [2nd Street.]. A character input
screen is displayed.
8. Enter the name of the 2nd street. After
finishing the entry, touch [List]. A list screen
is displayed.
9. Touch a street as the 2nd street from the list.
10. Touch [OK].
11. The select destination is displayed at the
center of the map. Touch [Start] after
confirming the location of the displayed
destination. The system sets the selected
location as the destination and starts calcu-
lating a route.
INFO:
After setting a destination, the location of the
destination can be adjusted and the location can
be stored in the Address Book, etc.
“Operations after setting destination”
(page 3-34)
SETTING CITY CENTER
It is possible to set the center of a city as a
destination and have the system calculate a
route.
1. Push the MENU button and touch [Destina-
tion].
2. Touch [Next Page].
3. Touch [City Center]. A character input
screen is displayed.
To Next Page
Loading...
