Nissan 2016 Leaf - Page 383

4. Read the tire pressure on the gauge
stem and compare it to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as necessary. If too
much air is added, press the core of
the valve stem briefly with the tip of the
gauge stem to release pressure. Re-
check the pressure and add or release
air as necessary.
6. Install the valve stem cap.
7. Check the pressure of all of the tires.
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGI-
NAL TIRE
P205/55R16
89H
250 kPa,
36 PSI
FRONT
ORIGI-
NAL TIRE
P215/50R17
90V
250 kPa,
36 PSI
REAR
ORIGI-
NAL TIRE
P205/55R16
89H
250 kPa,
36 PSI
REAR
ORIGI-
NAL TIRE
P215/50R17
90V
250 kPa,
36 PSI
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information iden-
tifies and describes the fundamental
characteristics of the tire and also pro-
vides the tire identification number (TIN)
for safety standard certification. The TIN
can be used to identify the tire in case of a
recall.
Example
8-30 Maintenance and do-it yourself