Nissan ENGINE - Service Data and Specifications (SDS); General Engine Specifications; Drive Belt Specifications; Intake and Exhaust Manifold Specifications

SERVICE DATA AND SPECIFICATIONS (SDS)
EM-129
< SERVICE DATA AND SPECIFICATIONS (SDS)
[VQ40DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Standard and Limit INFOID:0000000008799008
GENERAL SPECIFICATIONS
DRIVE BELT
INTAKE MANIFOLD COLLECTOR, INTAKE MANIFOLD AND EXHAUST MANIFOLD
Cylinder arrangement V-6
Displacement cm
3
(cu in)
3,954 (241.30)
Bore and stroke mm (in) 95.5 × 92.0 (3.76 × 3.622)
Valve arrangement DOHC
Firing order 1-2-3-4-5-6
Number of piston rings
Compression 2
Oil 1
Number of main bearings 4
Compression ratio 9.7
Compression pressure
kPa (kg/cm
2
, psi)/300 rpm
Standard 1,275 (13.0, 185)
Minimum 981 (10.0, 142)
Differential limit between cylinders 98 (1.0, 14)
Cylinder number
Valve timing
(Intake valve timing control - “OFF”)
Unit: degree
abcde f
244 240 −464 6 58
SEM713A
PBIC0187E
Tension of drive belts Auto adjustment by auto-tensioner
Revision: January 2013 2013 Xterra