[ Edit: 2016/ 11/ 24 Model: E12-A ]
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
The vehicle is not equipped with a USB device. USB
devices should be purchased separately as necessary.
This system cannot be used to format USB devices. To
format a USB device, use a personal computer.
In some states/area, the USB device for the front seats
plays only sound without images for regulatory
reasons, even when the vehicle is parked.
This system supports various USB memory devices,
USB hard drives and iPod players. Some USB devices
may not be supported by this system.
. Partitioned USB devices may not be played
correctly.
. Some characters used in other languages (Chi-
nese, Japanese, etc.) are not displayed properly
on display. Using English language characters
with a USB device is recommended.
General notes for USB use:
Refer to your device manufacturer’s owner information
regarding the proper use and care of the device.
Notes for iPod use:
“Made for iPod”, “Made for iPhone”, and “Made for
iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod,
iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod
shuffle, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. Lightning is
a trademark of Apple Inc.
. Improperly plugging in the iPod may cause a
checkmark to be displayed on and off (flickering).
Always make sure that the iPod is connected
properly.
. An iPod nano (1st Generation) may remain in fast
forward or rewind mode if it is connected during a
seek operation. In this case, please manually reset
the iPod.
. An iPod nano (2nd Generation) will continue to
fast-forward or rewind if it is disconnected during
a seek operation.
. An incorrect song title may appear when the Play
Mode is changed while using an iPod nano (2nd
Generation)
. Audiobooks may not play in the same order as
they appear on an iPod.
. Large video files cause slow responses in an iPod.
The vehicle center display may momentarily black
out, but will soon recover.
. If an iPod automatically selects large video files
while in the shuffle mode, the vehicle center
display may momentarily black out, but will soon
recover.
Compact Disc (CD)/USB device with MP3/
WMA
GUID-62488A2B-A715-4571-8F4F-AE2308AF574F
Explanation of terms:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
. MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3. MP3 is the most well known
compressed digital audio file format. This format
allows for near “CD quality” sound, but at a
fraction of the size of normal audio files. MP3
conversion of an audio track from CD can reduce
the file size by approximately 10:1 ratio (Sampling:
44.1 kHz, Bit rate: 128 kbps) with virtually no
perceptible loss in quality. MP3 compression
removes the redundant and irrelevant parts of a
sound signal that the human ear doesn’t hear.
. WMA — Windows Media Audio (WMA) is a
compressed audio format created by Microsoft as
an alternative to MP3. The WMA codec offers
greater file compression than the MP3 codec,
enabling storage of more digital audio tracks in the
same amount of space when compared to MP3s
at the same level of quality.
This product is protected by certain intellectual
property rights of Microsoft Corporation and third
parties. Use or distribution of such technology
outside of this product is prohibited without a
license from Microsoft or an authorized Microsoft
subsidiary and third parties.
. Bit rate — Bit rate denotes the number of bits per
second used by a digital music files. The size and
quality of a compressed digital audio file is
determined by the bit rate used when encoding
the file.
. Sampling frequency — The rate at which the
samples of a signal are converted from analog to
digital (A/D conversion) per second.
. Multisession — Multisession is one of the methods
for writing data to media. Writing data once to the
media is called a single session, and writing more
than once is called a multisession.
. ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains
information about the digital music file such as
song title, artist, album title, encoding bit rate,
track time duration, etc. ID3 tag information is
displayed on the Album/Artist/Song title line on
the display.
* Windows
®
and Windows Media
®
are registered
Monitor, Heater and air conditioner, and audio system 4-15
Condition:
To Next Page
Loading...