[ Edit: 2016/ 11/ 24 Model: E12-A ]
4-26 Monitor, Heater and air conditioner, and audio system
PHONE SEND/PHONE END SWITCH
GUID-927C185C-E77C-4C22-8D92-D0EFBAC5792B
Push this switch to operate the hands-free phone
system. Functional availability may vary depending on
the hands-free phone system.
SOURCE SELECT SWITCH
GUID-DDD90FA1-00B0-4894-8AAB-1E0D415A6B18
Push the SOURCE select switch to change the mode
to available audio source.
E12-A-120227-C4FD2A6E-3A99-4141-A76F-EFE3E3E25990
When installing a CB, ham radio or a car phone in your
vehicle, be sure to observe the following cautions,
otherwise the new equipment may adversely affect the
Engine Control System and other electronic parts.
CAUTION:
. Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a NISSAN dealer.
CAR PHONE OR CB RADIO
Condition:
To Next Page
Loading...