[ Edit: 2016/ 11/ 24 Model: E12-A ]
5-8 Starting and driving
. Start the engine in either the “P” (Park) or
“N” (Neutral) position. The engine will not
start in any other position. If it does, have
your vehicle checked by a NISSAN dealer.
. Shift into the “P” (Park) position and apply
the parking brake when at a standstill for
longer than a short waiting period.
. Keep the engine at idling speed while
shifting from the “N” (Neutral) position to
any driving position.
. When stopping the vehicle on an uphill
grade, do not hold the vehicle by depressing
the accelerator pedal. The foot brake pedal
should be depressed in this situation.
Starting vehicle
E12-A-120227-1C45BD5F-EADA-4D65-AECF-EE1D50F6B05E
1. After starting the engine, fully depress the foot
brake pedal before moving the shift lever out of the
“P” (Park) position.
2. Keep the foot brake pedal depressed and move
the shift lever to a driving position.
3. Release the parking brake, the foot brake pedal,
and then gradually start the vehicle in motion.
The CVT is designed so the foot brake pedal
MUST be depressed before shifting from the “P”
(Park) position to any driving position while the
ignition switch is in the “ON” position.
The shift lever cannot be moved out of the “P”
(Park) position and into any of the other
positions if the ignition switch is placed in the
“LOCK”, “OFF” or “ACC” position.
CAUTION:
. DEPRESS THE FOOT BRAKE PEDAL - Shift-
ing the shift lever to “D”, “R” or “L” without
depressing the foot brake pedal causes the
vehicle to move slowly when the engine is
running. Make sure the foot brake pedal is
depressed fully and the vehicle is stopped
before shifting the shift lever.
. MAKE SURE OF THE SHIFT LEVER POSI-
TION - Make sure the shift lever is in the
desired position. “D” and “L” are used to
move forward and “R” to back up.
. WARM UP THE ENGINE - Due to the higher
idle speeds when the engine is cold, extra
caution must be exercised when shifting the
shift lever into the driving position immedi-
ately after starting the engine.
JVC0026X
: Push the button
*
A
while depressing the
foot brake pedal.
: Push the button
*
A
.
: Just move the shift lever.
Shifting
E12-A-120227-810F9872-3389-490A-84B4-E6197F7CED03
WARNING:
. Apply the parking brake if the shift lever is in
any position while the engine is not running.
Failure to do so could cause the vehicle to
move unexpectedly or roll away and result in
serious personal injury or property damage.
. If the shift lever cannot be moved from the
“P” (Park) position while the engine is
running and the foot brake pedal is de-
pressed, the stop lights may not work.
Malfunctioning stop lights could cause an
accident injuring yourself and others.
After starting the engine, fully depress the foot brake
pedal, push the shift lever button and move the shift
lever out of the “P” (Park) position.
If the ignition switch is placed in the “OFF” or “ACC”
position for any reason while the shift lever is in any
positions other than the “P” (Park) position, the ignition
switch cannot be placed in the “LOCK” position.
When it is hard to shift the shift lever from the “P”
(Park) position to other position, first check that the
parking brake is applied, then release the foot brake
pedal and depress the foot brake pedal again.
If the ignition switch cannot be placed in the “LOCK”
position, perform the following steps:
1. Apply the parking brake.
2. Place the ignition switch in the “ON” position
while depressing the foot brake pedal.
3. Move the shift lever to the “P” (Park) position.
4. Place the ignition switch in the “OFF” position.
Condition:
To Next Page
Loading...