[ Edit: 2016/ 11/ 24 Model: E12-A ]
1-22 Safety — seats, seat belts and supplemental restraint system
Remove the head restraint
*
2
.
3. Position the front-facing child restraint system on
the front passenger’s seat. It should be placed in
the front-facing direction only.
Always follow the child restraint system manufac-
turer’s instructions for installation and use.
SSS0515
4. Route the seat belt tongue through the child
restraint system and insert it into the buckle until
you hear and feel the latch engage.
SSS0513
Locking clip
5. To prevent slack in the lap belt, it is necessary to
secure the shoulder belt in place with a locking
clip
*
A
. Use the locking clip attached to the child
restraint system, or one which is equivalent in
dimensions and strength.
Be sure to follow the child restraint system
manufacturer’s instructions for belt routing.
6. Slide the seat forward so that the seat belt fully
tightens the child restraint system.
7. Test the child restraint system before you place
the child in it. Tilt it from side to side. Try to tug it
forward and check if it is held securely in place.
8. Make sure that the child restraint system is
properly secured prior to each use.
Condition:
To Next Page
Loading...