[ Edit: 2016/ 11/ 24 Model: E12-A ]
SSS0513
To prevent slack in the lap belt, it is necessary to
secure the shoulder belt in place with a locking
clip
*
A
. Use the locking clip attached to the child
restraint system or one which is equivalent in
dimension and strength.
Be sure to follow the child restraint system
manufacturer’s instructions for belt routing.
3. Test the child restraint system before you place
the child in it. Tilt it from side to side. Try to tug it
forward and check if it is held securely in place.
4. Make sure that the child restraint system is
properly secured prior to each use.
Installation on front seat - seat belts without automatic locking mode
GUID-33556D78-38F1-4D68-B812-CF3175C13F63
SSS0300A
WARNING:
. Never install a rear-facing child restraint on
the front passenger’s seat when the front
passenger’s air bag is equipped. Supple-
mental front-impact air bags inflate with
great force. A rear-facing child restraint
could be struck by the supplemental front-
impact air bags in an accident and could
seriously injure or kill your child.
. Never install a child restraint system with a
top tether strap on the front seat.
. NISSAN recommends that a child restraint
system be installed on the rear seat. How-
ever, if you must install a front-facing child
restraint system on the front passenger’s
seat, move the passenger’s seat to the
rearmost position.
. Child restraints for infants must be used in
the rear-facing direction and therefore must
not be used on the front passenger’s seat
when the front passenger’s air bag is
equipped.
Front-facing:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
SSS0627
If you must install a front-facing child restraint system
on the front seat, follow these steps:
1. Move the seat to the rearmost position
*
1
.
2. Except for Thailand:
Adjust the head restraint to its highest position
*
2
.
For Thailand:
Safety — seats, seat belts and supplemental restraint system 1-21
Condition:
To Next Page
Loading...