•
[German]
•
[Spanish]
•
[Portuguese]
•
[Italian]
•
[Dutch]
•
[Turkish]
•
[Russian]
Scroll direction
The [Scroll Direction] set up screen will appear
when selecting the [Scroll Direction] item from the
set up menu.
Sets the scroll direction of the <TUNE/MENU> dial.
For example, to change the way in which you turn
the dial (anticlockwise or clockwise) in order to scroll
up or down a list.
Display brightness (Day/Night mode)
(where fitted)
Press the <SETUP> button with a long press to
switch the display brightness between the daytime
and nighttime mode.
COMPACT DISC (CD) OPERATION
The CD player can play a music CD or an encoded
MP3/WMA CD and while listening to those CD’s
certain text might be able to be displayed (when CD
encoded with text is being used).
Press the <CD> button and the CD (if loaded) will
start to play.
When <CD> is pressed and the radio or AUX source
mode is already operating, it will automatically turn
off the playing source and the CD play mode will
start.
However, if the CD disc is not loaded, then a notifi-
cation message will be displayed and the audio unit
remains in radio or AUX source mode.
CAUTION
•
Do not force the CD into the slot. This could
damage the player.
•
Do not use 8 cm (3.1 in) discs.
CD insert (CD player)
Insert the CD disc into the slot with the label side
facing up. The disc will be guided automatically into
the slot and will start playing. After loading the disc,
track information will be displayed.
CAUTION
Do not force the CD into the slot. This could dam-
age the player.
NOTE
•
The CD player accepts normal audio CD or
CD recorded with MP3/WMA files.
•
Inserting a CD recorded with MP3/WMA files,
the audio unit will automatically detect and
[MP3CD] will be indicated.
•
An error notification message will be
displayed when inserting a wrong disc type
(for example DVD), or the player cannot read
the CD disc. Eject the disc and insert another
disc.
CD button
Press the <CD> button to start playing the loaded
CD. Playing starts from the track that was being
played when the CD play mode was switched off. If
the CD is not loaded, then a notification message
will be displayed and the audio unit remains in the
radio or AUX source mode.
Audio main operation
List view:
While the track is being played, press either the
<ENTER> or <
> button to display the available
tracks in a listed view mode. To select a track from
the list, or a track to start listening from, turn the
<TUNE/MENU> dial then press <ENTER>.
Quick search:
In the list view mode, quick search can be per-
formed to find a track from the list.
Push the <A-Z/
j6>button then turn the <TUNE/
MENU> dial for the first alphabetic/numerical letter
of the track title then press <ENTER>. When found,
a list of the available tracks will be displayed. Select,
and press <ENTER> to play the preferred track.
Heater and air conditioner, and audio system 4-31
To Next Page
Loading...