Each time the <ENTER> button is pressed, the mode
will change as follows:
[Bass] → [Treble] → [Balance] → [Fade] → [AUX
VOL] → [SPD VOL] → setup menu screen [Audio]
→ [Bass]
Bass control:
Use this control to enhance or attenuate bass re-
sponse sound.
Turn the <TUNE/MENU> dial clockwise or anti-
clockwise to adjust the bass settings then press
<ENTER> to confirm.
Treble control:
Use this control to enhance or attenuate the treble.
Turn the <TUNE/MENU> dial clockwise or anti-
clockwise to adjust the treble settings then press
<ENTER> to confirm.
Balance control:
Use this control to adjust the balance of the volume
between the left and right speakers.
Turn the <TUNE/MENU> dial anticlockwise or
clockwise to adjust the left/right balance then press
<ENTER> to confirm.
Fade (Fader) control:
Use this control to adjust the balance of the volume
between the front and rear (where fitted) speakers.
Turn the <TUNE/MENU> dial anticlockwise or
clockwise to adjust the front/rear balance then press
<ENTER> to confirm.
AUX VOL (Auxiliary volume) control:
Use this control to adjust the volume output from the
auxiliary source.
Turn the <TUNE/MENU> dial anticlockwise or
clockwise to select [LO], [MID], or [HI] mode then
press <ENTER> to confirm.
SPD VOL (Speed volume) control:
This mode controls the volume output from the
speakers automatically in relation to vehicle speed.
When [SPD VOL] is displayed, turn the <TUNE/
MENU> dial clockwise or anticlockwise to adjust
the volume level.
Adjusting the setting to 0 (zero) turns off the speed
volume feature. Increasing the speed volume setting
results in the audio volume increasing more rapidly
with vehicle speed. Once chosen, press <ENTER>
to save the setting.
Clock setting
The [Clock] set up screen will appear when select-
ing the [Clock] item from the set up menu.
Turn the <TUNE/MENU> dial clockwise or anti-
clockwise, the mode will change as follows:
[Set Time] ⇔ [On/Off] ⇔ [Clock Format] ⇔ [Set
Time]
[Set Time]:
Select [Set Time] then adjust the clock as follows:
1. The hour display will start flashing. Turn the
<TUNE/MENU> dial to adjust the hour.
2. Press the <ENTER> button. The minute display
will start flashing.
3. Turn the <TUNE/MENU> dial to adjust the
minute.
4. Press <ENTER> to finish the clock adjustment.
[On/Off]:
Set the clock display between on or off when the
audio unit is turned off.
If set in the [ON] position, the clock will be dis-
played when the audio unit is turned off either by
pressing the <
> button or when the ignition
switch is placed in the “OFF” position.
[Clock Format]:
Set the clock display between 24-hour mode and
12-hour clock mode.
Bluetooth®
For activation or deactivation details, see “Mobile
phone integration (FM-AM radio with CD player)”
later in this section
Language
The [Language] set up screen will appear when
selecting the [Language] item from the set up menu.
Select the appropriate language and press the
<ENTER> button. Upon completion, the screen will
automatically adapt the language setting.
•
[French]
•
[English]
4-30 Heater and air conditioner, and audio system
To Next Page
Loading...