If you have a flat tyre, follow the instructions as fol-
lows.
STOPPING VEHICLE
WARNING
•
Make sure that the parking brake is securely
applied.
•
For Manual Transmission (MT) models: Make
sure the shift lever is in the R (Reverse) posi-
tion.
For Xtronic Transmission (CVT) models: Make
sure that the shift lever is in the P (Park) posi-
tion.
•
Never change tyres when the vehicle is on a
slope, ice or a slippery area. This is hazard-
ous.
•
Never change tyres if oncoming traffic is close
to your vehicle. Wait for professional road as-
sistance.
1. Safely move the vehicle off the road away from
traffic.
2. Turn on the hazard indicator flasher lights.
3. Park on a level surface.
4. Apply the parking brake.
5. Shift the shift lever (MT models) into the R (Re-
verse) position (Xtronic models, move the shift
lever to the P (Park) position).
6. Turn off the engine.
7. Open the bonnet and set up the warning triangle
(where fitted):
•
Warn other traffic.
•
Signal to professional road assistance that
you require assistance.
8. Have all passengers exit the vehicle and stand in
a safe place, away from traffic and clear of the
vehicle.
CHANGING FLAT TYRE (Models with
spare wheel, where fitted)
Blocking the wheels
WARNING
Make sure to block the appropriate wheel to pre-
vent the vehicle from moving, which may cause
personal injury.
Place suitable blocks
j1 in front of and behind the
wheel diagonally opposite the flat tyre
jA to prevent
the vehicle from moving when it is on the jack.
Getting the tools and spare wheel
(where fitted)
The spare wheel, jack and tools are located inside
the luggage compartment.
MCE0001DZ
JVE0055X
FLAT TYRE
In case of emergency 6-3
To Next Page
Loading...