Nissan NOTE - Page 258

The following are approximate capacities. The actual refill quantities may be slightly different. When refilling, follow the procedures instructed in the “8. Maintenance
and do-it-yourself” section to determine the proper refill capacity.
Approximate Capacity
Recommended Fuel/Lubricants
Metric Measure Imperial Measure
Fuel 41 L 9 gal See “Fuel recommendation” later in this section.
Engine oil
The approximate capacities listed are for refilling during
an engine oil change. For additional information, see
“Engine oil” in the “8. Maintenance and do-it-yourself”
section.
Petrol engine HR12DE
— Genuine NISSAN engine oil 0W20
— API grade SN
— ILSAC grade GF-5
Petrol engine HR12DDR
— Genuine NISSAN engine oil 5W30
— API grade SL, SM or SN
— ILSAC grade GF-4 or GF–5
— ACEA A5/B5
Diesel engine K9K
— Genuine NISSAN engine oil 5W30 DPF
— ACEA C4
For additional information, see “Recommended SAE
viscosity number” later in this section.
HR12DE
With engine oil filter 3.4 L 3 qt
Without engine oil filter 3.2 L 2-7/8 qt
HR12DDR
With engine oil filter 3.9 L 3-3/8 qt
Without engine oil filter 3.7 L 3-1/4 qt
K9K
With engine oil filter 4.8 4-1/4 qt
Without engine oil filter 4.7 4–1/8 qt
Cooling system (including reservoir tank capacity 0.7 L (5/8 qt)
Use Genuine NISSAN Engine Coolant or equivalent in
its quality, in order to avoid possible aluminium corro-
sion within the engine cooling system caused by the use
of non-genuine engine coolant.Note that any repairs
for the incidents within the engine cooling system
while using non-genuine engine coolant may not be
covered by the warranty even if such incidents
occurred during the warranty period.
HR12DE 5.7 L 5 qt
HR12DDR
MT models 5.8 L 5-1/8 qt
Xtronic models 6.3 L 5-1/2 qt
K9K 6.2 L 5-1/2 qt
RECOMMENDED FLUIDS/LUBRICANTS AND CAPACITIES
9-2 Technical information