NOTE
The “Friendly Lighting” function can be cancelled
by switching the ignition switch to the Acc or ON
position.
Daytime running lights (where fitted)
Even if the headlight switch is in the OFF or AUTO
position, the daytime running lights (in the front fog
light units) illuminate after the engine is started.
BATTERY SAVER SYSTEM
The light reminder chime will sound if the driver’s
door is opened while the following operation is
found:
•
The headlight switch is in either the
or
position, and the ignition switch in the ACC, OFF
or LOCK position.
Be sure to turn the headlight switch to the “OFF”
position when you leave the vehicle.
If the doors are closed and locked with the inte-
grated keyfob, the Intelligent Key or the door re-
quest switch while the headlight switch is in either
the
or position, the battery saver function
will turn off the lights to prevent the battery from
being discharged. The lights will turn on when the
doors are being opened.
CAUTION
Do not leave the lights on when the engine is not
running for extended periods of time to prevent
the battery from being discharged.
HEADLIGHT AIMING CONTROL
The headlight aiming control operates when the ig-
nition switch is in the “ON” position and the head-
light is on to allow the headlight axis to be adjusted
according to the driving condition.
When driving with no heavy load/luggage or driving
on a flat road, select the normal position “0”.
If the number of occupants and load/luggage in the
vehicle changes, the headlight axis may become
higher than normal.
If the vehicle is travelling on a hilly road, the head-
lights may directly shine on the rearview and outside
mirrors of a vehicle ahead or the windscreen of an
oncoming vehicle, which may obscure other drivers’
vision.
To adjust to the proper aiming height, turn the switch
accordingly. The higher the number designated on
the switch, the lower the headlight axis.
JVI0477XZ
Instruments and controls 2-21
To Next Page
Loading...