[ Edit: 2012/ 4/ 9 Model: E26-A ]
SSD0488
Left-Hand Drive (LHD) model
SSD0489
Right-Hand Drive (RHD) model
1. Firmly apply the parking brake.
2. Automatic Transmission (AT) model: Move the
selector lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position. When parking
on an uphill grade, move the shift lever to the “1”
(1st) position.
3. To help prevent the vehicle from moving into traffic
when parked on an incline, it is a good practice to
turn the wheels as illustrated.
HEADED DOWNHILL WITH CURB
*
1
Turn the wheels into the curb and move the vehicle
forward until the curb side wheel gently touches
the curb. Then apply the parking brake.
HEADED UPHILL WITH CURB
*
2
Turn the wheels away from the curb and allow the
vehicle to move back until the curb side wheel
gently touches the curb. Then apply the parking
brake.
HEADED UPHILL OR DOWNHILL, WITHOUT
CURB
*
3
Turn the wheels toward the side of the road so the
vehicle will move away from the center of the road
if the vehicle moves. Then apply the parking brake.
4. Turn the ignition switch to the “LOCK” position
and remove the key.
Starting and driving 5-13
To Next Page
Loading...