[ Edit: 2012/ 4/ 9 Model: E26-A ]
1-4 Safety — seats, seat belts and supplemental restraint system
Reclining:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
JVR0090X
1. Pull the adjusting lever
*
1
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever to lock the seatback in
position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-6).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Folding rear seats (if equipped)
GUID-1003FC14-CA26-43C4-A4DF-0663F6732C9D
WARNING:
. Be careful not to damage the seat belt while
folding the rear seats.
. Never allow anyone to ride in the luggage
area or on the rear seats when they are in
the folded position. Use of these areas by
passengers without proper restraints could
result in serious injury in an accident or
sudden stop.
. Do not fold the rear seats while the vehicle is
moving.
. Do not fold the rear seats when occupants
are on the rear seat area or any luggage is
on the rear seats.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks.
. When returning the seat to the original
position, be certain they are completely
secured in the latched position. If they are
not completely secured, passengers may be
injured in an accident or sudden stop.
. Securely store the removed head restraints
(if equipped) to prevent them from being
thrown around in case of a sudden stop or
accident.
. Head restraints (if equipped) should be
adjusted properly as they may provide sig-
nificant protection against whiplash injury.
Always replace and adjust them properly if
they have been removed for any reason.
Type A:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
JVR0092X
To Next Page
Loading...