[ Edit: 2012/ 4/ 9 Model: E26-A ]
Front-facing:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
SSS0627
If you must install a front-facing child restraint system
on the front seat, follow these steps:
1. Move the seat to the rearmost position
*
1
.
2. Adjust the head restraint to its highest position
*
2
(if equipped).
3. Position the front-facing child restraint system on
the front passenger’s seat. It should be placed in
the front-facing direction only.
Always follow the child restraint system manufac-
turer’s instructions for installation and use.
SSS0515
4. Route the seat belt tongue through the child
restraint system and insert it into the buckle until
you hear and feel the latch engage.
To prevent slack in the lap belt, it is necessary to
secure the shoulder belt in place with a locking
clip
*
A
. Use the locking clip or another locking
device attached to the child restraint system.
Be sure to follow the child restraint system
manufacturer’s instructions for belt routing.
SSS0513
5. Slide the seat forward so that the seat belt fully
tightens the child restraint system.
6. Test the child restraint system before you place
the child in it. Tilt it from side to side. Try to tug it
forward and check if it is held securely in place.
7. Make sure that the child restraint system is
properly secured prior to each use.
Safety — seats, seat belts and supplemental restraint system 1-17
To Next Page
Loading...