[ Edit: 2012/ 4/ 9 Model: E26-A ]
4-10 Heater and air conditioner, and audio system
Audio main operation
GUID-A203A14F-74F5-44CE-8968-1A06463440BF
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Power button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To turn on and off the audio system, push the Power
button.
. The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
Volume control knob:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To control the volume, turn the Volume control knob.
Turn the knob clockwise to turn up the volume.
Turn the knob counterclockwise to turn down the
volume.
MENU button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To change the audio settings (BASS, TREBLE,
FADER, BALANCE and CLOCK), push the
button to select the mode while the CD or radio is on.
Push the
button until the desired mode appears
on the display.
BASS ? TREBLE ? FADER ? BALANCE ?
CLOCK
Push the SEEK/TRACK (
or ) button or
TUNE/FF·REW (
or ) button to adjust the
audio settings.
BAS(S):
(−) to decrease / (+) to increase
TRE(BLE):
(−) to decrease / (+) to increase
FAD(ER):
(F) to front fade / (R) to rear fade
BAL(ANCE):
(R) to right balance / (L) to left balance
Clock display:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK ON
(CLK ON) or CLOCK OFF (CLK OFF) appears on
the display while the audio system is on.
2. Push the SEEK/TRACK (
or ) button or
TUNE/FF·REW (
or ) button to toggle
between CLOCK ON or CLOCK OFF.
Clock adjustment:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK ON (CLK ON)
is on the display. The hour digit will blink.
2. To adjust the hours, push the SEEK/TRACK (
or ) button or TUNE/FF·REW ( or )
button.
3. When the adjustment of the hour digit is complete,
push the
button. The minute digit will blink.
4. To adjust the minutes, push the SEEK/TRACK
(
or ) button or the TUNE/FF·REW (
or ) button.
If no user input is detected for 10 seconds, or when
the “MENU” button is pushed, the clock setting mode
will return to the normal mode.
AUX button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape, CD player,
MP3 player or laptop computer.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
NISSAN strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
monaural cable is used.
FM-AM radio operation
GUID-E42594EF-F6DF-40CF-85C2-67847753BCAE
Frequency range and step change:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To change the frequency range and step specification
of the radio, perform the following operations.
1. Turn the audio unit off by pushing the Power
button.
2. Turn the audio unit on by pushing the Power
button while pushing the radio memory buttons
, and the button.
For vehicles with specifications for Central/South
America, the display indicates “AM 530 kHz”.
For vehicles with other specifications, the display
indicates “AM 531 kHz”.
If you experience difficulties in changing radio speci-
fication, contact a NISSAN dealer.
FM-AM button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
When the button is pushed while the audio
system is off, the audio system will turn on and the
radio will turn on.
When the
button is pushed while a CD is already
To Next Page
Loading...