EasyManua.ls Logo

Nissan Urvan - Page 87

Nissan Urvan
167 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (88,1)
[ Edit: 2012/ 4/ 9 Model: E26-A ]
4-12 Heater and air conditioner, and audio system
1 Track repeat:
The selected track of the CD will be played
continuously. The display indicates “1”.
RDM (random) button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
To change the play sequence, push the button to
select the mode.
RDM ? Normal play ? RDM
RDM: All the tracks of the CD will be played
continuously in random order. The display
indicates “RDM”.
CD EJECT button:
GUID-896AA31A-81D 0-4E9B-81ED-1F58D53AA854
When the button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed with ease.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD.
CD CARE AND CLEANING
GUID-3B16E4B9-A1F6-4DB2-BF92-6F1F58264E0A
SAA0451
CD
GUID-B3C1D261-41FD-4CF0-B182-E59F9417B3B3
. Handle a disc by its edges. Never touch the
surface of the disc. Do not bend the disc.
. Always place the discs in the storage case when
they are not being used.
. To clean a disc, wipe the surface from the center
to the outer edge using a clean, soft cloth. Do not
wipe the disc using a circular motion.
Do not use a conventional record cleaner or
alcohol intended for industrial use.
. A new disc may be rough on the inner and outer
edges. Remove the rough edges by rubbing the
inner and outer edges with the side of a pen or
pencil as illustrated.
GUID-21058E39-5931-4396-9B24-97B10B1465D6
When installing a CB, ham radio or a car phone in your
vehicle, be sure to observe the following cautions,
otherwise the new equipment may adversely affect the
Engine Control System and other electronic parts.
CAUTION:
. Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a NISSAN dealer.
CAR PHONE OR CB RADIO

Related product manuals