Need help?Do you have a question about the Nissin Digital MF18 and is the answer not in the manual?
General| Brand | Nissin Digital |
|---|---|
| Model | MF18 |
| Power Source | 4 x AA batteries |
| Recycle Time | 0.1-5.5 seconds |
| Color Temperature | 5600K |
The color display automatically rotates for easy operation in horizontal and vertical positions.
Important warnings regarding potential damage or defects from improper use or storage.
Flash light fully controlled by the camera for proper exposure.
Flash light automatically controlled by camera with flash exposure compensation.
Control slave flashes remotely with manual power selection on the ring flash.
Setting flash power from 1/128 to 1/1024 with 1/6 Ev steps.
Setting flash power from 1/1 to 1/64 with 1/3 Ev steps.
Variety of custom settings available for user-defined defaults.
FE Lock, 1st curtain, High speed, and 2nd curtain synchronization options.
FV Lock, 1st curtain, High speed (FP), and Rear curtain synchronization options.
1st curtain and High speed shutter synchronization options.
Guide to correctly insert AA batteries into the battery magazine for operation.
Step-by-step instructions for attaching the MF18 flash unit to the camera hotshoe.
Instructions on how to expand the flash head to prevent vignetting.
Steps for detaching the flash unit and turning it on.
How to activate and use the modelling LED lamps for focusing assistance.
Details on automatic power-off and display-off for battery conservation.
Setting the flash for fully automatic camera control and operation.
How to set camera modes for Full Automatic flash control across different brands.
Explains camera viewfinder indicators and flash firing in Full Automatic mode.
Adjusting flash power for optimal exposure using TTL mode.
Details on EV compensation steps and power ratio combinations for TTL mode.
Configuring the flash for wireless master/remote operation and compatible models.
Navigating channels, EV compensation, and group settings for wireless communication.
Step-by-step guide for selecting and setting TTL, Manual, and RMT modes.
Adjusting power ratios from 1/128 to 1/1024 with 1/6 Ev steps in Fine Macro mode.
Adjusting power ratios from 1/1 to 1/64 or OFF with 1/3 Ev steps in Manual mode.
Introduction to customizing MF18 with six available settings like My TTL, Display, and Auto Off.
Procedure to reset all custom settings to factory defaults.
FE Lock (Canon) and FV Lock (Nikon) for memorizing flash values.
Setting 1st curtain and High speed shutter synchronization for Canon.
How to use 2nd curtain sync for capturing motion blur with Canon cameras.
Setting 1st Curtain, High Speed, and Rear Curtain sync via camera for Nikon.
Setting 1st curtain and High speed shutter synchronization for Sony cameras.
Information on external power packs and X-terminal for synchronization.
To Next Page