To Next PageTo Next Page
Need help?Do you have a question about the Nissindo MA-930 and is the answer not in the manual?
Covers reading instructions, retaining manuals, following warnings, and general usage safety.
Guidelines on water, moisture, ventilation, and heat exposure for safe operation.
Information on power sources, cords, plugs, polarization, and grounding.
Covers damage, performance changes, noise exposure, and radio interference.
Details the items included in the product package.
Specifies the correct type of power source for the unit.
Advises against overloading outlets and extension cords to prevent fire.
Introduces the Nissindo MA-930 as a versatile mixing amplifier.
Discusses constant gain vs. constant sensitivity in amplifiers.
Details the high, mid, and low frequency adjustment controls.
Explains the feature that sets volume to zero on power-on.
Describes the automatic cooling fan that activates at 60°F.
Allows adjustment of music key for karaoke singing.
Discusses AC outlet configurations and minimizing ground loops.
Guidance on using shielded cables and appropriate speaker wire gauges.
Warns about prolonged exposure to loud noise and hearing damage.
Lists detailed technical data including output, sensitivity, and dimensions.
Lists the included accessories like remote control and power cable.
Illustrates how to connect speakers to the amplifier.
Labels and describes each button and part of the remote control.
Instructions for inserting batteries and storing the remote.
Tips for effective use and optimal range of the remote control.
Details the main power switch and volume adjustment knobs.
Explains controls for microphone volume, EQ, balance, and echo.
Describes microphone input jacks and signal status lights.
Functions for selecting audio inputs and digital key adjustment.
Controls for echo delay, repeat, and music EQ adjustments.
Adjustments for music volume, balance, and echo mode.
Identifies the location of the infrared receiver for the remote.
Details RCA inputs for music, microphone send, and output connectors.
Describes music mode selection and volume reset function.
Identifies the terminals for connecting speaker systems A and B.
Indicates the location of the AC power input socket.
Explains XLR, TRS, and RCA connector pinouts and types.
Provides detailed measurements and weight of the amplifier unit.
Illustrates connecting multiple speakers to the amplifier.
Shows how to connect sources like LD players and TVs.
Diagram for connecting tape recorders or other recording devices.
Guides connecting to home theater systems including receivers and speakers.
Specific instructions for turning off the amplifier when using home theater.
Shows how to connect wireless microphone receivers to rear inputs.
Illustrates connecting wired microphones to front panel jacks.
General