EasyManuals Logo

Nitecore EMR10 User Manual

Nitecore EMR10
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Warnings
1. The product is designed to be used by adults. Keep the
product out of reach of children.
2. Children under 16 years old must be under adult
supervision when using this product to prevent scalds and
accidents.
3. DO NOT place the product in water.
4. DONOTputyourngers,metalsorforeignmattersintothe
product to avoid accidents or damage.
5. DONOTusetheproductinaconnedspace.
6. Stop using the product and dispose of it immediately if
thereisanyleakage,odor,ordeformationinthebattery.
7. It is recommended to use with NITECORE Li-ion batteries
orotherswithsafetycertication.
8. DO NOT expose the product to temperatures above 60°C
(140℉)foralongtime.
9. DO NOT disassemble or modify the product without
authorization,asthiswillcausethewarrantytobenullied.
Please check the Warranty Service for details.
10. Please install the Heat Insulation Guard when using the
product to prevent scalds.
11.Whenusingtwo21700Li-ionbatteries,pleaseusetwowith
thesamecapacitywhilethevoltagedierencebetween
them is less than 0.1V to avoid damage to the battery or
circuit.
Warranty Service
All NITECORE
®
products are warranted for quality. Any DOA /
defective product can be exchanged for a replacement through
a local distributor/dealer within 15 days of purchase. After
that,alldefective/malfunctioningNITECORE
®
products can
be repaired free of charge within 12 months from the date
ofpurchase.Beyond12months,thechargeforaccessories,
replacement parts and delivery shall be at your own expenses.
Thewarrantywillbenulliedif
1.theproduct(s)is/arebrokendown,reconstructedand/or
modiedbyunauthorizedparties.
2.theproduct(s)is/aredamagedduetoimproperuse.
For the latest information on NITECORE
®
productsandservices,
please contact a local NITECORE
®
distributor or send an email
to service@nitecore.com
※Thetrademarksandproductimagesspeciedhereinthis
user manual are for reference purposes only. The copyright
belongs to their lawful holders.
※Allimages,textsandstatementsspeciedhereinthis
user manual are for reference purposes only. Should any
discrepancy occur between this manual and information
speciedonwww.nitecore.com,SysmaxInnovationsCo.,
Ltd. reserves the rights to interpret and amend the content
of this document at any time without prior notice.
Worldwide Warranty Service
Model number Date of purchase
————————————— —————————————
Serial number Store Stamp
————————————— —————————————
Thisisthecerticateofauthenticityifthisitemandwe
conrmthatithasbeensubjectedtothemostexacting
qualitycontrolsbySYSMAXInnovationsCo.,Ltd.
NOTE:
Please ensure this warranty card is fully completed by the
distributor or retailer after purchasing the product. Should
the product fail to operate correctly during the warranty
period,itmaybereturnedwiththecompletedwarrantycard
and original sales receipt to the retailer or local distributor
for replacement or repair.
Customer Service Email: service@nitecore.com
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address
Unit6355,5/F,No.1021
GaopuRoad,TianheDistrict,
Guangzhou,510653,Guangdong,China
Thanks for purchasing NITECORE!
MadeinChina
EMR19071022
Please 󽗉nd us on facebook : NITECORE Charger
EMR10
Portable Electronic
Multipurpose Repeller
IMPORTANT
Read all instructions before use.
This product is intended for adult use only. This product is not
a toy.
Product Introduction
TheEMR10isspeciallydesignedforoutdooractivities,suchas
outdoorwork,camping,shing,trekkingandmore.
Specifications
Input 5V2.4A / 9V2A(18WMAX)
Output 5V2.4A / 9V2A / 12V1.5A(18WMAX)
Rated Capacity 10,000mAh36WhMAX
Ultrasound
Frequency
25kHz,40kHz
Heating
Temperature
125°C / 257°F MAX
Modes
Indoor Mode: 11ft Protection Zone
Outdoor Mode: 16ft Protection Zone
Dimensions
167mm x 59.5mm x 33.5mm
(6.6"x2.3"x1.3")
Weight
149g±5g(5.26oz±0.1oz)
(AccessoriesNotIncluded)
Accessories
HeatInsulationGuard,USB-CChargingCable,
10xMosquitoRepellentMats,2x21700
NL21505,000mAhLi-ionBatteries(optional)
Powered by
1or221700Li-ionBattery(s)toprovidea
max runtime of 12h
Waterproof
Rating
IPX5
Battery Installation
1. Slide the Battery Cover Lock Switch on the bottom to open
the battery cover.
2.Ensurethebattery(s)is/areinsertedwiththenegative
end towards the spring. The product will not work if the
battery(s)is/areincorrectlyinserted.
3. Cover the battery cover and slide the Battery Cover Lock
Switch to lock it.
Charging
Connecting to the External Power
Use the USB cable to connect an external power supply (e.g.
aUSBadapter,apowerbankorotherUSBchargingdevice)to
the USB charging port to begin the charging process. (Input:
5V2.4A / 9V2A)
Note: The mosquito repelling function and ultrasonic function
can be activated during the charging process.
Operating Instructions
Mosquito Repelling Function
On: Whenthemosquitorepellingfunctioniso,long
presstheMosquitoRepellingButtontoturniton,andthe
corresponding indicator will turn green.
O: Whenthemosquitorepellingfunctionison,long
presstheMosquitoRepellingButtontoturnito,andthe
correspondingindicatorwillbeo.
Mode Switching: When the mosquito repelling function
ison,shortpresstheMosquitoRepellingButtontoswitch
between Indoor Mode and Outdoor Mode.
Ultrasonic Function
On:Whentheultrasonicfunctioniso,longpressthe
UltrasonicButtontoturniton,andthecorresponding
indicator will turn green.
O: Whentheultrasonicfunctionison,longpressthe
UltrasonicButtontoturnito,andthecorresponding
indicatorwillbeo.
Note:Humanscanbarelyhearultrasound(above20,000Hz).
Lockout / Unlock
Lockout: Whenbothfunctionsareo,doublepressthe
Mosquito Repelling Button to access Lockout Mode. In this
case,themosquitorepellingfunctionandtheultrasonic
function are both unavailable.
Unlock: WhentheproductisintheLockoutMode,double
press the Mosquito Repelling Button to unlock the mosquito
repelling function and the ultrasonic function.
Hibernation Status
The EMR10 will enter hibernation after 30 seconds if the USB-C
port is not in use while the mosquito repelling function and
ultrasonicfunctionareo.Inthiscase,theOLEDdisplaywillbe
o;presseitherbuttontoshowtheremainingbatterypower.
OLED Real-time Display
When the mosquito repelling function or ultrasonic function
isturnedon,theOLEDdisplaywillshowtheselected
function,selectedmode,runtimeandmore.
Duringthechargingprocess,theOLEDdisplaywillshowthe
chargingpower,batterypercentageandmore.
Duringthedischargingprocess,theOLEDdisplaywillshow
theoutputpower,runtimeandmore.
Using the EMR10
1.Whentheproductiso,insert1repellentmatintothe
Repellent Mat Placement Area.
2. Long press the Mosquito Repelling Button to activate the
mosquito repelling function.
3. The protection zone will be created after 10 minutes.
4.Afteruse,longpresstheMosquitoRepellingButtontoturn
othemosquitorepellingfunction.Pleasestoretheproduct
after cooling completely.
Note: NITECORE Mosquito Repellent Mat Size: 34mm x 48mm
/1.34"x1.89"(upto6hourseach)
Mosquito Repellent Mat Replacement
MakesuretheEMR10isoandcooled.Insertanewrepellent
mat while pushing out the used one.
EMR10 Placement
Place the EMR10 upwind of the mosquito repellent area if it
is windy.
DO NOT cover the EMR10 during the using process.
It is recommended to use multiple EMR10 together to create
a larger protection zone.
Charging the External Device
USB Output:AvailablewiththeUSBoutput,theEMR10canbe
used as a power supply to charge external devices.
Connecting to the External Device: Use the USB cable to
connect an external USB device to the USB charging port to
begin the charging process.
Note: Duringthedischargingprocess,theUSBoutputwillbe
automaticallyotoprotectthebatteryifthebatteryvoltageis
low.
Storage and Transportation
Store the product in ventilated and dry places at room
temperature.
The battery should be removed to store separately when left
unused for a long time.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nitecore EMR10 and is the answer not in the manual?

Nitecore EMR10 Specifications

General IconGeneral
BrandNitecore
ModelEMR10
CategoryHousehold Appliance
LanguageEnglish