Nitecore HU60 - Helmet Strap Instructions; Helmet Strap Installation; Helmet Strap Quick Release

Helmet Strap
1.TakeotheoriginalheadbandoftheHU60andinstall
the helmet strap as illustrated in diagram (5).
2. Secure the HU60 on the helmet with the hook-and-loop
fastener of the helmet strap as illustrated in diagram (6).
Note: The HU60 is available with quick dismount as
illustrated in diagram (1). For reinstallation, please insert it
as illustrated in diagram (7).
自行车头盔绑带
1.卸下 HU60 原装头灯带，并把头盔绑带装在 HU60 头灯
带支架上，如图（5）。
2.捆绑在自行车头盔上并用魔术贴固定即可，如图（6）。
注：可根据图（1）所示方法快速卸下 HU60，再次装上时，
请按照图（7）所示方向装入。
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06 Central Tower, No.5 Xiancun Road,
Tianhe District, Guangzhou, 510623, Guangdong, China
Please 󽗉nd us on facebook : NITECORE Flashlight
Thanks for purchasing NITECORE!
Made in China
HU29046021
（ 5 ）
（ 6 ） （ 7 ）