EasyManua.ls Logo

NITEforce CONCEPT 4G LTE - Troubleshooting Image Capture Problems; Subject Detection and PIR Settings

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 20 -
during the winter months. Sending during the cold winter
requires Power. Small AA batteries could be frozen more easily
(power is frozen).
* Check that micro SD card is not full
* Please make sure SIM card PIN code is disabled (OFF)
Photos Do Not Capture Subject of Interest?
* Check the “PIR Sensor Level” (PIR sensitivity) parameter
setting
* Try to set your camera up in an area where no heat resources
are in the camera’s field of view (lake, river)
* In some cases, like camera near water will make the camera
take images with no subject in them. Try to aim the camera over
ground.
* Try to set camera on stable and immovable objects
* At night, PIR motion detector may detect beyond range of the
Flash illumination. Reduce distance setting by adjusting PIR
sensor sensitivity.
* Rising sun or sunset can trigger sensor. Camera must be
reoriented.
* If person or animal moves quickly, it may move out of the