NITEforce CONCEPT 4G LTE - Battery Installation Process; Inserting AA Alkaline Batteries

- 7 -
you will hear "click"
Remove PIN code from your SIM card, before inserting
micro SIM card into camera
Note: Check your SIM card data plan speed details from your
operator, before installing SIM card. The camera supports SIM
card with LTE 4G High Speed. If original pictures are sent,
minimum Upload Speed 5MB/sec is required
> INSERT BATTERIES
Insert 8pcs Good Quality AA 1.5V Alkaline Batteries while
ensuring polarity ( + / - ) is correctly orientated. Please see below
pictures:
Open the front door of the device by unlatching the locking tab