EasyManua.ls Logo

NITEforce CONCEPT 4G LTE - Page 22

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 22 -
sources
* Surroundings like trees, walls and ground, the flash range can
get you better night time images
* Do not aim camera to the total open field when there is nothing
within flash range to reflect flash back. It’s like shining a flashlight
into sky in night, you just can’t see anything. Same does camera
Get More Pictures Saved to the SD Card than
Transmitted?
* Poor reception or busy network signals may result in poor
connectivity at certain times and places
* Increase PIR Delay to 1 3 min as the camera may not be
able to transmit as fast in certain network areas
* Move camera to different location and test connection strength
and sending
* Change SIM from different operator who has better 4G signal
on the area
The Camera Does Not Turn ON
* Ensure batteries are inserted properly with correct polarity and
are full. If possible, test each battery with battery tester.