32
high voltage. Hold the measuring wires only behind
the circles.
29. Never use the mulmeter with the casing open
or damaged.
30. You must never touch the two measuring ps during
a measurement.
31. Never exceed the maximum input values for
the respecve measurement range selected.
32. Risk of explosion!
Never use the mulmeter in
the vicinity of explosive steam or gas.
Do not use the mulmeter in dusty environments.
33. Fire hazard!
If you detect smoke, or if there
are unusual noises or smells, stop
the current measurement. Remove all measuring
cables immediately and turn the mulmeter o. The
mulmeter should not be used further under any
circumstances. It must rst be checked for damage
by a specialist. Never breathe in smoke if the device
sets on re. If this happens, seek medical assistance.
34. Cauon! Risk of electric shock
Never exceed the specied
overvoltage
category CAT II.
35. An electronic copy of this
manual is available at: hp://
www.instrukcje.vershold.com
To Next Page
Loading...