Need help?Do you have a question about the niteo AG0021-22 and is the answer not in the manual?
This document describes the Niteo 710 W Angle Grinder, model AG0021-22, a power tool designed for grinding and cutting metal or stone.
The Niteo 710 W Angle Grinder is primarily used for grinding and cutting metal or stone. For cutting operations, a suitable cutting disk (not included in the product package) must be purchased separately. The device is intended exclusively for domestic use and is not suitable for commercial applications. All individuals operating, maintaining, or transporting the unit must be familiar with this instruction manual and adhere to all technical and safety guidelines.
The vibration value may vary depending on the area of use and can exceed the specified emission value in exceptional situations. Prolonged operation may cause numbness in hands and shoulders. Measures to mitigate vibration include wearing soft gloves, taking breaks, holding the device firmly, and seeking service if vibration levels are high. Noise generated by the device can cause hearing impairment; users should wear ear protectors and take breaks if discomfort occurs. If noise levels are high or unusual, contact service. The device should not be wrapped in fabric to reduce noise, as this can impede ventilation and cause overheating, leading to fire or injury. To minimize respiratory risks, wear a dust mask and ensure good ventilation. For eye protection, wear safety goggles.
The angle grinder features a disk guard, spindle, lock button, side handle, non-slip rubber lining, power cord with plug, on/off switch with safety device, key/wrench for disk installation, fastening flange, grinding disk (not included), spacing flange, and carbon brushes.
To attach the side handle (4), screw it clockwise into one of the three holes on the tool body until it is tight. To remove or reposition the handle, unscrew it. It is crucial to never operate the tool without the side handle firmly attached.
Never operate the tool without the disk guard (1) firmly attached.
Proper and regular cleaning enhances safety and extends the device's lifespan. Warning: Switch off, unplug, and allow the device to cool down before cleaning and maintenance to prevent electric shock and burns. Protective devices, ventilation openings, and the motor housing should always be free of dust and contaminants. Wipe the device with a damp cloth or blow it with low-pressure compressed air. If unexpected issues occur, disconnect the power, unplug the tool, and have it checked and repaired by a qualified technician before further use. It is recommended to clean the device immediately after each use. Prevent water from entering the device. Use only identical spare parts. Caution: Do not use chemical, alkaline, abrasive, or disinfecting substances for cleaning, as they can damage the surface.
The device contains no user-serviceable parts. Do not attempt to repair it yourself. Always have repairs performed by a specialist. Any abnormalities observed during inspection or operation indicate a need for service center repair. If the power cord is damaged, it must be replaced with an identical one by the manufacturer, a service center, or a qualified person.
a) The device should be cleaned as described and stored in its original packaging. b) Always keep the device in a dry, well-ventilated location inaccessible to children. c) Protect the device against vibration and shock during transport. d) Use the device handle(s) for holding/carrying it. e) Wind up the power cable carefully.
All packaging materials are 100% recyclable and should be disposed of according to local regulations. Keep packaging materials out of reach of children. The crossed-out wheeled bin symbol indicates that the product should not be disposed of with municipal waste at the end of its useful life. It should be handed over to an electrical and electronic equipment collection point. Plastics in the device are recyclable and should be sorted accordingly. Information on electric and electronic device collection locations is available from local government agencies or the dealer.
The product is warranted for 36 months from the purchase date, confirmed by a duly completed warranty card. The warrantor will, at its discretion, repair, replace, or refund the purchase price for damaged or faulty products. A damaged product is one that fails to perform as described in the manual due to intrinsic properties. To claim warranty, deliver the appliance to a Customer Service Point with a completed warranty card or purchase receipt/invoice and a detailed description of the defect. The warranty card is invalid without the vendor's stamp, signature, and sale date. The warranty excludes physical damage not caused by the manufacturer or distributor, incorrect usage, force majeure, or products with a removed tamper-proof seal (unless by authorized service personnel). Repairs will be attempted within 21 days, extendable to 1 month if spare parts are unavailable. For easier repair, submit the complete product with all original components. This warranty does not exclude, restrict, or suspend buyer rights related to warranty for defects under the Civil Code. The warranty applies within the territory of the Republic of Poland.
VERSHOLD POLAND Sp. z o.o. ul. Żwirki i Wigury 16A, 02-092 Warszawa, Polska Made in China
Electronic version of the manual is available at: http://www.instrukcje.vershold.com
To Next Page
General