FUNCTION INTRODUCTION
1、Here below are the DEFAULT buttons (the ones you can assign to other functions):
□//1/X, ○/3/B, △/4/Y, X/2/A, L1/5/LB, L2/7/LT, R1/6/RB, R2/8/RT
2、Here below are the PROGRAMMABLE buttons (the ones you can setup):
L-wing (□/1/LT), R-wing (X/2/RT), Accelerator pedal (X/2/RT), Brake pedal
(□ /1/LT), L3/11/SL, R3/12/SR, Gear-shi (L2/7/LB,R2/8/RB)
1、 Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until
the green LED turns on
2、Press the PROGRAMMABLE button until the green LED starts blinking
3、Press the DEFAULT button until the green LED turns o
· PROGRAM SETUP
· CLEAR SINGLE PROGRAM
1、 Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until
the green LED turns on
2、Press the programmed button until the green LED starts blinking
3、Press the programmed button until the green LED turns o
· CLEAR ALL PROGRAMS
1、 Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 seconds until the
green LED turns on
2、Press & hold “OPTIONS/10/Menu” for 4 seconds until the green LED turns o
All the programmed buttons are cleared
1、Press & hold “SHARE/9/View” + “Option/10/Menu” for 3 seconds until the
green LED turns on
2、Press D-PAD LEFT until the green LED turns o
The pedals are programmed as Y-AXIS
· PROGRAM PEDALS AS Y-AXIS
PROGRAM FUNCTIONS
· INTRODUCTION
You can assign to some buttons (PROGRAMMABLE) functions of other buttons (DEFAULT)
To Next Page
Loading...