Nitho DRIVE PRO V16 - Paddle Shifter and Pedal Axis Programming; Wheel Sensitivity Adjustment Levels

Wheel sensitivity is adjustable from the sensibility selector (LO MID HI)
· WHEEL SENSITIVITY ADJUSTMENT (3 LEVELS)
1、 Press & hold “SHARE/9/View” + “Option/10/Menu” for 3 seconds until the
green LED turns on
2、Press D-PAD RIGHT until the green LED is o.
L-Wing and R-Wing are programmed as Y-AXIS
· PROGRAM L-WING AND R-WING AS Y-AXIS
1、 Press & hold “SHARE/9/View” + “OPTIONS/10/Menu” for 3 sec until the
green LED turns on
2、Press the L/R-wing or pedal set as Y-AXIS, the green LED will start to blink
3、Press the L/R-wing or pedal set as Y-AXIS until green LED o
Note:
All settings will NOT be cleared when the wheel is powered o
· CLEARANCE THE L/R-WING OR PEDAL AS Y-AXIS