Nitho DRIVE PRO V16 - Troubleshooting Common Issues; Connection LED Not Lit; No Device Response; Important Precautions and Care

TROUBLE SHOOTING
PRECAUTIONS
1、 If the connection LED is not on, please re-connect to the controller again and
retry
2、If the wheel do not give any response, turn o and on again the console and
procees the wheel setup once again
1、Read carefully the user manual before using the wheel
2、Do not disassemble or modify
3、Avoid to store in a smoky, humid or dusty place
To easly remove the wheel from the table
pull and raise up the strap on the suction cup side
· SUCTION CUP