Nitho DRIVE PRO - PC CONNECTION AND MANAGEMENT; PC X-INPUT and D-INPUT Modes; Testing and Calibration Procedures; Driver Uninstallation Process

1、 Start→ Control Panel→ programs/Function
2、Find the driver you want to remove in the Interface ”current installed programs”
Click “Remove” and follow the instructions to get the successful uninstall
· DRIVER UNINSTALL
PC GUIDE
1、 The wheel is set on X-INPUT as default
2、Press & hold HOME for 3seconds to switch to D-input then the LED will switch
o and switch on again aer 0.5seconds
· X-INPUT
1、 Enter Test interface to check buttons and axis functions
2、Enter Calibration interface to calibrate the axis
· TEST