To Next PageTo Next PageWhat to do if Nitto Kohki AO-5575 Drill motor stops during drilling? (Lamp blinks in green.)?
If the Nitto Kohki Drill motor stops during drilling and the lamp blinks green, it's likely due to excessive feeding force. Reduce the feeding force to resolve this issue.
Why does Nitto Kohki AO-5575 motor rotation slow down and stop during drilling? (The lamp rapidly blinks in red.)
If the rotation of the Nitto Kohki Drill motor slows down and stops during drilling, and the lamp rapidly blinks in red, the cause is likely excessive feeding force. The suggested solution is to reduce the feeding force.
General| Model | AO-5575 |
|---|---|
| Motor | Pneumatic |
| Vibration Level | 2.5 m/s² |
| Category | Drill |
| Power Source | Compressed Air |
| Net Weight | 3.5 kg |
Essential safety practices for operators, including clothing, eye, and hearing protection.
Guidelines for maintaining a safe work environment, including cleanliness and hazard avoidance.
Steps to ensure machine safety before operation, including securing work and tools.
Instructions for machine maintenance, repairs, and part checks, emphasizing authorized service.
Critical safety information regarding electrical grounding, power cords, and proper usage.
Critical warnings regarding ceiling use, magnet/motor run times, and material compatibility.
Guidelines for workpiece thickness, magnetic material use, and back-up plate requirements.
General steps for drilling, including punch marking and surface preparation.
