To Next Page

To Previous Page

NIX SPECTRO 2: QUICK START GUIDE

Turning On

& Charging your Device

The Nix Spectro 2 arrives in a “sleep” state. To wake it up, plug in the

provided USB-C charging cable into the USB port on the device (plug the

other end into a wall adapter or PC). Once charging, the gel sticker located

at the top of the device will illuminate to indicate it’s connected to power.

For a full charge, keep your device plugged in for four hours.

You can check the battery level of your device by connecting to the Nix

Toolkit app. Select the device icon in the top right corner of the home page

to see your battery’s level. Your device must be connected to the app via

Bluetooth to see this information (see page 10 for details on connecting).

Note: The Nix Spectro 2 does not need to be turned o. It will automatically

hibernate when the Spectro app is closed.

Illuminated gel

sticker upon

charging

Questions and Answers:

Need help?

Do you have a question about the NIX Spectro 2 and is the answer not in the manual?

NIX Spectro 2 Specifications

General