10
Device Set-Up
Connecting to Bluetooth
Before attempting to connect to your Nix Spectro 2, be sure the device
has been woken up and has a charge (see page 13). On your Android/iOS
smartphone or tablet, ensure Bluetooth is enabled in your settings. Open
the Nix Toolkit app (see page 8 for app details). The app may request to
access your location (this is necessary for Bluetooth connectivity), accept
the request.
Place your Nix Spectro 2 next to your smartphone or tablet. Press the
inactive device connection icon at the top left of your screen
(indicating that a device is not connected). If prompted, select the device
with the highest signal strength from the list. Typically it takes 15-20
seconds to connect, but may take up to 60 seconds. The app will prompt
you when your device has been succsessfully connected.
To Next Page
Loading...
Need help?
General