To Next Page

To Previous Page

NIX SPECTRO 2: QUICK START GUIDE

Using the Reference Tile

You will periodically be required to conrm that the Nix Spectro 2 is within

advertised specications. The app may request access to your camera to

scan the QR code accompanying the reference tile (used for the verication

process), accept the request.

To verify your Nix Spectro 2, Press the icon located on the right top

corner and select Calibrate to start the process. Remember to remove

any adapters you may have attached to the Nix Spectro 2. Follow the

instructions on the app, which will conrm whether or not the device is

calibrated to the factory settings.

See page 13 for instructions on cleaning the reference tile.

Remember: Always close the reference tile container and store in the

included carrying case to prevent dirt or dust buildup which can impact

future measurements.

Questions and Answers:

Need help?

Do you have a question about the NIX Spectro 2 and is the answer not in the manual?

NIX Spectro 2 Specifications

General