If only half of the IF32 is being used, it is not necessary to
connect a power supply to the other half. Only one power
indicator will light in this case.
Connect the 0-10V analogue outputs from the IF32 to the
analogue inputs of the power pack.
Setting t he DMX address switches:
DMX addresses Switches on
(other switches off)
1 to 16 None
9 to 24 8
17 to 32 16
25 to 40 16, 8
33 to 48 32
41 to 56 32, 8
49 to 64 32, 16
57 to 72 32, 16, 8
65 to 80 64
73 to 88 64, 8
81 to 96 64, 16
89 to 104 64, 16, 8
97 to 112 64, 32
105 to 120 64, 32, 8
113 to 127 64, 32, 16
121 to 136 64, 32, 16, 8
129 to 144 128
137 to 152 128, 8
145 to 160 128, 16
153 to 168 128, 16, 8
161 to 176 128, 32
169 to 184 128, 32, 8
177 to 192 128, 32, 16
© N.J.D. Electronics 1997 -Page 5-
IF32 User Guide
To Next Page
Loading...