THE POWER PLUG SHALL BE DISCONNECTED FROM THE MAINS SUPPLY
- When the fan is not in use
- When it is moved
- When servicing the fan
- When cleaning the fan
DO NOT USE THE FAN:
- When the plug or cord is damaged
- When the fan has fallen
- When the fan is not working properly
- If the fan is damaged in any way
Do not hang this product on a wall or ceiling.
Do not operate this product if the fan grilles are not correctly in place.
If the cord is damaged, have it replaced by a qualified electrician.
ASSEMBLY OF THE STAND
1. Put the 2 pedestals together like a cross (8). Place the upright on top of this (9) and screw it down firmly with the screws provided. (4
pieces). Use a PH1 Phillips screwdriver (not supplied).
2. Remove the height adjustment screw and pull up the extendable tube, make sure it does not sink! Slide the protective cap (10) down
over the upright so that it falls over the two pedestals, and screw back the adjustment screw.
3. Place the fan on the extendable pipe and secure it with the clamping nut (11).
To Next Page
Loading...