Need help?Do you have a question about the NKT Photonics Koheras ADJUSTIK and is the answer not in the manual?
Introduces the laser, its functionality, interfaces, and chassis variants.
Provides procedures for connecting, configuring, managing, and installing the laser.
Highlights warnings, cautions, and essential safety guidelines for laser operation.
Details the DFB fiber laser, its characteristics, and available model variants.
Explains thermal tuning (narrow/wide) and piezo tuning for wavelength adjustment.
Describes the controls, connectors, and indicators on the laser's front and rear panels.
Outlines the specifications for the main and monitor optical outputs.
Covers fast wavelength modulation using external signals or internal generator.
Explains current/power modes, trigger input/output, and auto-start features.
Describes the meaning of status LEDs and the purpose of chassis labels.
Guides through navigating and using the laser's front panel menu system.
Details installation of CONTROL software and connecting via USB or Ethernet.
Step-by-step instructions for safely turning the laser on.
Explains the CONTROL GUI, panels, settings, and monitoring capabilities.
Covers mounting, heat dissipation, and environmental considerations for installation.
Details connecting the safety interlock, power, modulation, and trigger signals.
Instructions for connecting the optical output connector properly.
Provides detailed optical, mechanical, and environmental specifications.
Information on servicing the laser, warranty, and contact details.
Details pin assignments for modulation and external bus connectors.
Step-by-step guide for installing the CONTROL software.
Introduces the laser, its functionality, interfaces, and chassis variants.
Provides procedures for connecting, configuring, managing, and installing the laser.
Highlights warnings, cautions, and essential safety guidelines for laser operation.
Details the DFB fiber laser, its characteristics, and available model variants.
Explains thermal tuning (narrow/wide) and piezo tuning for wavelength adjustment.
Describes the controls, connectors, and indicators on the laser's front and rear panels.
Outlines the specifications for the main and monitor optical outputs.
Covers fast wavelength modulation using external signals or internal generator.
Explains current/power modes, trigger input/output, and auto-start features.
Describes the meaning of status LEDs and the purpose of chassis labels.
Guides through navigating and using the laser's front panel menu system.
Details installation of CONTROL software and connecting via USB or Ethernet.
Step-by-step instructions for safely turning the laser on.
Explains the CONTROL GUI, panels, settings, and monitoring capabilities.
Covers mounting, heat dissipation, and environmental considerations for installation.
Details connecting the safety interlock, power, modulation, and trigger signals.
Instructions for connecting the optical output connector properly.
Provides detailed optical, mechanical, and environmental specifications.
Information on servicing the laser, warranty, and contact details.
Details pin assignments for modulation and external bus connectors.
Step-by-step guide for installing the CONTROL software.
General| Brand | NKT Photonics |
|---|---|
| Model | Koheras ADJUSTIK |
| Category | Industrial Electrical |
| Language | English |
To Next Page