noahome.com
STEP 3
• Use four M6x14 hexagon screws (part #16) to fix the desk leg and feet. Repeat for opposite leg. (total of 8 pcs)
• Insert two connecting poles into installing shelves. Make sure the open slot of the central beam is closer to the desk leg
(with thinner sides facing upwards).
STEP 4
•
Position the frame at the center of the desktop. Extend the frames to adjust the width accordingly;
• Use eleven (11pcs) M6x14 hexagon screws (part #16) to tighten the frame to the desktop. Place soft cushions (part 13) between the
frame and the desktop.
• Use two ST5x16 (part #17) tapping screws to find the hand controller to the underside of the desktop.
M6x14 screws (part #16) - 4 pcs per leg
M6x14 screws (part #16) - 11 pcs
ST5x16 screws (part #17) - 2 pcs
To Next Page
Loading...