NOAH ACTUATION CO.,LTD.
1. Caution
2
http://www.emico.co.kr
ELECTRICAL SHOCK HAZARD
To avoid serious personal injury, property damage or death, turn off
all power to the actuator before removing the cover.
Before installation or use, verify the nameplate information to
insure the correct model number, torque, voltage and enclosure type.
Be sure to completely review the actuator manual prior to operation.
Final limit switch adjustment must be done after mounting the actuator
to the valve. Incorrect adjustment may cause actuator failure.
Over torque switches are factory set. Tampering with the over torque switch
settings may damage the actuator and void the warranty.
To Next Page
Loading...
