NOAH ACTUATION SA Series - User Manual

Key safety warnings, including electrical hazards, grounding, and manual review.

Proper storage environment, temperature, and condensation prevention measures.

Details on general, environmental, operational, and component specifications.

Overview of enclosure, ambient, power, protection, operation, and material specifications.

Lists optional modules and provides performance data tables by model.

Diagrams illustrating exterior components for different actuator models.

Illustration of the actuator's internal parts and their arrangement.

Breakdown of information found on the actuator's nameplate label.

Information on ISO 5211 standard flanges and available drive inserts.

Instructions for assembling the actuator to a butterfly valve, including grease application.

Steps for securing the assembly and testing valve rotation.

Guidance on assembling the actuator to a ball valve and packing gland adjustment.

Steps for securing the ball valve assembly and checking rotation.

Final assembly steps for ball valves and limit switch setting.

Specifies necessary clearance for actuator installation and maintenance.

Detailed instructions for calibrating the open and close limit switches.

How to adjust the valve position indicator for correct alignment.

Information on cable entry standards and recommended sealing practices.

Steps for wiring, grounding, and using terminal blocks.

Critical safety advice, especially regarding power application during wiring.

Covers maintenance recommendations, warranty conditions, and troubleshooting.

Visual representations and measurements for actuator models.

Specifics on flange P.C.D. and drive insert options.