NOAH ACTUATION SA Series User Manual

2
Electrical shock hazard
To avoid serious personal injury, property damage or death, turn
off all power to the actuator before removing the cover.
Before installation, verify the nameplate information to insure
the correct model number and voltage of the actuator.
Be sure to completely review the actuator manual prior to
operation.
Final limit switch adjustment must be done after mounting the
actuator to the valve. Incorrect adjustment may cause
actuator failure.
The actuator must be properly grounded.
use the grounding lugs provided on the inside or outside of the
actuator body.
To minimize the possible damage caused by condensation, be
sure to energize the heater.
1. Caution
http://www.emico.co.kr
NOAH ACTUATION CO.,LTD.

NOAH ACTUATION SA Series Specifications

General

Brand	NOAH ACTUATION
Model	SA Series
Category	Controller
Language	English