NOAH ACTUATION SA Series - 11. Actuator and Valve Assembly; Ball Valve Securing and Testing

12
http://www.emico.co.kr
11-2-3
Remove the manual over ride lever provided on the actuator base, and with power off, open the
actuator counter-clockwise. Also, open the valve that is to be mounted.
11-2-4
Apply a light coating of grease to the valve
stem and actuator drive. assemble the valve
and actuator together and secure with
the proper bolting.
L-Wrench
▼
Grease
▼
▼
NOAH ACTUATION CO.,LTD.