Need help?Do you have a question about the Nobili BNE Series and is the answer not in the manual?
General| Brand | Nobili |
|---|---|
| Model | BNE Series |
| Category | Paper Shredder |
| Language | English |
Guidance on correct machine operation, safety checks, and prohibited actions.
Explanation of the warning symbol used throughout the manual for safety instructions.
Details on machine identification, type, model, and reflector labels.
Labels for guard safety, manual reference, engine shutdown, and operational dangers.
Labels indicating greasing intervals and machine power input settings.
Labels for PTO shaft fitting and safe operation of transmission components.
Labels for safe machine lifting and handling procedures.
Label detailing belt tension adjustment and maintenance.
General safety awareness, maintenance, and proper shutdown procedures.
Operational safety rules, personnel safety, and road transport compliance.
Ensuring propeller shaft marking and guard rotation protection.
Precautions for uneven ground and risks of projection of stones or fragments.
Details on available hitch points for lifting the machine.
Using correct hoisting equipment and being mindful of balance.
Defining the danger zone and proper use of the machine hood for maintenance.
Prohibiting open hoods during operation and risks from machine misuse.
Recommendations for use, including pre-operation checks and engine stops.
Checks for blades, wear, belt tension, nuts, bolts, and safety chains.
Guidelines for storage and recommendations for personal protective equipment (PPE).
Monitoring vibrations and user responsibility for road transport compliance.
Checking blades/rams for wear, damage, and consequences of impacts.
Criteria for replacing blades, rams, and pins based on wear and damage.
Assembly procedures, torque settings for nuts, and pin rotation checks.
Instructions for assembling skids, roller, or wheel units, including guard mounting.
Ensuring correct oil drain plug is fitted for shipping and use.
Safety warnings for the three-point hitch area and coupling procedures.
Selecting hitch positions and adjusting drawbar and links for proper connection.
Adjusting the third point tie rod and understanding warranty voidance conditions.
Adjusting cutting height and machine attitude for optimal material infeed.
Ensuring correct propeller shaft length and minimum overlap for safety.
Procedures for cutting shaft components, followed by cleaning and greasing.
Checks for shaft angles, dimensions, and recommendation for free-wheel shafts.
Securing the rotation of the cardan joint protection with chains.
Maintaining blade clearance and adjusting working height for skids, rollers, or wheels.
Safety precautions and step-by-step instructions for fixed drawbar adjustment.
Safety measures for parking and maintenance procedures for end-of-season storage.
Ensuring a slight forward tilt when parking outdoors to prevent backwater.
Lubrication of cardan transmission and oil change schedule for the gear unit.
Daily checks for blades, vanes, and bearings, including lubrication intervals.
Procedures for daily belt tension checks and adjustments.
Restoring belt tension and criteria for belt replacement.
Safety before replacement, partial/total replacement procedures, and balancing checks.
Instructions for changing selflocking nuts and tightening them with specific torque values.
Procedures for adjusting the drawbar using manual or hydraulic drive.
Specifications for hydraulic system oil type and maximum pressure.
Precautions for road circulation and requirements for reflector panel installation.
Fitting required warning signs approved by the highway code for road haulage.
Troubleshooting excessive vibrations, poor cutting, belt overheating, and belt issues.
Troubleshooting gearbox overheating, quick wear, and oil leaks from transmission.
Troubleshooting warped roller/wheel supports and safety vanes.
Details on guarantee coverage, exclusions, and conditions that void the warranty.
User responsibilities for maintenance and the guarantee application procedure.
Scope of the spare parts catalogue and reference to related tables.
Essential information for ordering spare parts: type, code, description, and quantity.
To Next Page
