Noble Falcon ANC - User Manual

To Next Page

Instruction Manual

Model： Falcon ANC

FCC Statement

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions (1)this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Main Page

Need help?

Do you have a question about the Noble Falcon ANC and is the answer not in the manual?

This document describes the Noble Falcon ANC Bluetooth 5.2 True Wireless Earbuds, covering their functions, technical specifications, usage, and maintenance.

Function Description:

The Noble Falcon ANC earbuds are true wireless earbuds designed for audio playback, communication, and active noise cancellation (ANC). They feature Bluetooth 5.2 connectivity for wireless pairing with devices. The earbuds support various audio functions including play, pause, next track, and previous track. For calls, they allow users to answer, hang up, and reject calls. Voice assistant (Siri) activation is also supported. Volume control can be managed directly from the earbuds. A unique feature is the "Hear-through" mode, also referred to as "Ambient Mode," which allows users to hear their surroundings while listening to audio. The primary noise control feature is Active Noise Cancellation (ANC), which can be toggled on or off. The earbuds come with a charging case that also serves as a power bank for the earbuds.

Important Technical Specifications:

Connectivity: Bluetooth 5.2
Noise Control: Active Noise Cancellation (ANC) and Hear-through (Ambient Mode)
Audio Codecs: Qualcomm aptX Adaptive and Qualcomm aptX
Battery Indicator: The charging case has a 4-segment LED indicator for battery levels (0-25%, 25-50%, 50-75%, 75-100%).
Charging: The case charges via DC 5V.
LED Indicators:
- Power On: Orange & white LED light on for 1 second.
- Standby: White LED flashes twice every 5 seconds.
- Pairing: White and orange LED lights flash alternately.
- Reset: White LED flashes quickly, then orange & white LED twinkle, indicating reset completion.
- Power Off: Orange LED light on for 1 second.
- Charging (Case): White LED ON.
- Fully Charged (Case): All LEDs On.
- Charging (Earbuds): Orange LED ON.
- Fully Charged (Earbuds): Orange LED Off.
- Battery Low: Orange LED light flashes twice every second.

Usage Features:

Power On/Off:
- Automatic Power On: Taking earbuds out of a sufficiently charged case powers them on automatically. The orange & white indicator light will light up for one second.
- Manual Power On: If earbuds are off, lightly press both earbuds' Multifunction Buttons (MFB) to boot up, accompanied by a "Power on" voice prompt.
- Manual Power Off: Long press the MFB button for 5 seconds to hear "dong dong" and release, followed by a "Power off" voice prompt. The orange indicator light will light up for one second.
- Automatic Power Off: Placing earbuds into a sufficiently charged case automatically turns them off.
Pairing:
- Method 1 (Automatic): Take earbuds out of the charging case; they will automatically power on and enter pairing mode with orange and white indicator lights twinkling alternately. Enable Bluetooth on your phone, search for "Falcon ANC," and click to pair.
- Method 2 (Manual): If earbuds are not connected and in standby mode, double-tap the left or right MFB to enter pairing mode. Enable Bluetooth on your phone, search for "Falcon ANC," and click to pair.
- Reconnection: If earbuds are connected to a device, placing them in the case and taking them out will automatically reconnect. If unsuccessful, they will re-enter pairing mode. Disconnecting from a device will also cause them to enter pairing mode.
Controls (via MFB):
- Play/Pause: Single tap (either L or R).
- Next Track: Double tap (R).
- Previous Track: Triple tap (R).
- Answer/Hang Up Call: Single tap (either L or R).
- Reject Call: Long press for 1 second and release (either L or R).
- Siri Enable: Long press for 2 seconds to hear "dong" and release (L).
- Volume Up: Triple tap (L).
- Volume Down: Double tap (L).
- Hear-through Enable: Long press for 2 seconds to hear "dong" and release (R), followed by "Ambient Mode" voice prompt.
- ANC Enable/Disable: After enabling Hear-through, long press for 2 seconds to hear "dong" and release (R), followed by "Noise canceling on" voice prompt. Press again for 2 seconds to hear "Noise canceling off" voice prompt. The sequence is Hear-through mode → ANC On → ANC Off.
Reset Function: Ensure the charging case has sufficient charge. Place earbuds in the case, confirm the orange LED light is on. Long press both left and right MFB for 10 seconds and release. The orange light will turn off, and the white light will turn on. Take earbuds out; the white light will flash quickly. After a few seconds, earbuds will enter pairing mode with one earbud's white and orange lights flashing alternately. This method can restore normal function if an earbud is flashing quickly or only one earbud connects.

Maintenance Features:

Charging: The earbuds are charged by placing them in the charging case. The case itself is charged via a USB cable.
Warnings:
- Disconnect previous devices before pairing new ones.
- Avoid long-term exposure to high noise volumes to prevent hearing loss.
- Do not use in locations prohibiting electronic equipment.
- Consult a physician before use if you have a pacemaker or other medical device.
- The package may contain small parts, posing a hazard to small children.
- Do not disassemble the device, as it contains lithium batteries, and disassembly can result in electric shock, fire, or serious injury. Disassembly by unauthorized persons voids the warranty.
- The product is not designed for use in water; keep it away from water and liquids to prevent permanent damage.

FCC Statement:

The device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. The equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try corrective measures such as reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.