To Next PageTo Next PageWhat to do if there is a severe vibration or noise when the Noblerex Massager K1 is operating?
If your Noblerex Massager K1 is vibrating severely or making unusual noises, ensure that the floorboard is resting on a flat, hard surface. Try moving the machine to an area without carpet or any inclines or declines.
What to do if there are two, three, or four LED lights flickering and making noise on both sides of the noblerex k2 mh-7500 operation board?
If you observe two, three, or four LED lights flickering and making noise on your Noblerex Massager K1, it may be overheating. The device has a safety mechanism that automatically shuts it off to cool down. Please wait at least 30 minutes before attempting to use it again.
What to do if none of the LED lights are on when the power cord is plugged into an outlet for the noblerex k2 mh-7500 Massager K2?
General| Model | K2 MH-7500 |
|---|---|
| Category | Massager |
| Battery Type | Lithium-ion |
| Heat Function | Yes |
| Adjustable Intensity | Yes |
| Material | ABS Plastic |
| Functions | Shiatsu, Kneading |
| Auto Shut-off | Yes |
| Power Source | Rechargeable Battery |
| Charging Time | 2.5-3 hours |
Covers voltage, water exposure, cord handling, plug insertion, and proper shutdown.
Addresses foreign substances, surface placement, child supervision, and weight limits.
Describes manual mode switch, speed/time indicators, power button, and auto mode switch.
Explains the functions of speed controls, power button, remote receiver, and mode switches.
Explains power, auto modes (1, 2, 3), time control, and manual mode buttons.
Details intensity fluctuations for Auto Mode 1 (1-5), 2 (1-7), and 3 (1-10).
Covers starting, auto mode selection, manual mode conversion, and speed/time control.
Details LED/warning sound indicators for overheating and automatic safety shutdowns.
Explains simultaneous LED illumination and warning tone leading to machine shutdown.
Addresses issues like equipment not operating, no LED lights, flickering LEDs, and unusual vibration/noise.
Details the one-year warranty against manufacturer's defects and exclusions.
