ENGLISH
CARBONATOR 5
Keep the sparkling water maker away from potential sources of heat
Due to the laws of physics, the pressure in the gas cylinder depends on the outside temperature. The sparkling
water maker is optimized for using the gas cylinder at room temperature. If the cylinder gets too hot, it could be
dangerous to use the machine.
Do not transport the sparkling water maker with the gas cylinder attached
Always unscrew the gas cylinder during transport.
Do not use the water bottle after the expiry date
After the bottle has expired, the plastic may have weakened a little bit and for safety reasons the water bottle
should be replaced with a new one.
More advice on the water bottle
Never use a bottle that has been deformed,discolored or scratched. Never put the bottle in the freezer.
Keep bacteria and bad smell away by always keeping the bottle clean and storing it without the cap being
screwed on.
Never inject gas into an empty water bottle
Using an empty water bottle may lead to a higher pressure in the water bottle which could result in a safety risk.
Keep the sparkling water maker away from children
Children are way too creative to use this product.
Always use your sparkling water maker in an upright position
If used in other ways than standing in an upright position, dangerous levels of CO2 could accumulate in the
water bottle during carbonation.
Don’t place the sparkling water maker in a sunny window.
Don’t place the sparkling water maker close to a hot radiator.
Don’t place the sparkling water maker close to an open flame.
Don’t use the sparkling water maker in extreme hot conditions.
To Next Page